Drives.vbs ‘Remove Drives ON ERROR RESUME NEXT DIM objNetwork,colDrives,i SET objNetwork = CREATEOBJECT(“Wscript.Network”) SET colDrives = objNetwork.EnumNetworkDrives FOR i = 0 to colDrives.Count-1 Step 2 ‘ Force Removal of network drive and remove from user profile ‘ objNetwork.RemoveNetworkDrive strName, [bForce], [bUpdateProfile] objNetwork.RemoveNetworkDrive colDrives.Item(i),TRUE,TRUE NEXT ‘Connect Drives On Error Resume Next Læs mere…
Robocopy Script @ECHO OFF SETLOCAL SET _source=\\Server1\Share1 SET _dest=D:\Shares\Share2 SET _what=/ZB /E :: /COPYALL :: COPY ALL file info :: /ZB :: Use restartable mode; if access denied use Backup mode :: /SEC :: copy files with SECurity :: /E :: Copy Subfolders, including Empty Subfolders. :: /PURGE :: Delete Læs mere…
Problem Seen in Outlook when connecting to a mailbox on an Exchange Server, its caused by using a self signed certificate OR a purchased certificate, where the internal and external names are different. Solution 1. On the Exchange Server > Start > All Programs > Microsoft Exchange Server {version} > Exchange Læs mere…
After you make the additional space available in VMWare/Xen/Hyper-V, first reboot your Ubuntu server so it can see the new free space (commenter Michal, below, points out that you can avoid this restart by asking the kernel to rescan the disk with ‘echo 1 > /sys/class/block/sda/device/rescan’). Then we’ll run the Læs mere…
Outlook 2013 (PC) Manually Set up for Office 365 Follow these instructions to do so: 1. Go to Control Panel, and click Mail. 2. Click Show Profiles and then click Add. 3. Type in a friendly name for the profile, and click OK. 4. Click to select the Manual setup, Læs mere…
Know Your FSMO Locations Make sure that the DC you are removing is not holding any of the FSMO Roles i) On any health domain controller, click Start, click Run, type “Ntdsutil” in the Open box, and then click OK ii) Type “roles”, and then press ENTER iii) Type “connections”, Læs mere…
Introduction Configure Domain Controller to synchronize time with external NTP server (dk.pool.ntp.org) UDP port 123 must be open on firewall to allow NTP traffic in and out from this DC. From DC command prompt type “telnet portquiz.net 123” to test if the port 123 traffic can go out. Logon to Læs mere…